Material: Nickel-copper (Ni-Cu) alloy, specifically formulated with a nickel content ranging from 30% to 45% (depending on AWG size). This alloy is selected for its superior electrical conductivity (typically 28–32 S/m at 20°C), which surpasses that of pure copper in high-temperature environments, and its exceptional corrosion resistance—critical for applications exposed to moisture, chemicals, or saltwater (e.g., marine heating systems or coastal industrial facilities).
AWG Sizes and Current-Carrying Capacity: The cable is offered in 8 distinct AWG sizes, each optimized for specific current loads:
10 AWG: Conductor diameter of 2.588mm, maximum current capacity of 55–60A (at 75°C ambient temperature), ideal for high-power heating systems such as industrial oven heating elements or large-scale pipeline freeze protection.
12 AWG: Conductor diameter of 2.053mm, maximum current capacity of 40–45A, suitable for medium-power applications like mold heating in plastic manufacturing.
14 AWG: Conductor diameter of 1.628mm, maximum current capacity of 25–30A, used in commercial heating equipment (e.g., restaurant kitchen appliances).
16 AWG: Conductor diameter of 1.291mm, maximum current capacity of 18–22A, common in automotive de-icing systems and small industrial heaters.
20 AWG: Conductor diameter of 0.812mm, maximum current capacity of 8–10A, tailored for precision heating in medical devices (e.g., diagnostic tool temperature control).
24 AWG: Conductor diameter of 0.511mm, maximum current capacity of 3–5A, used in laboratory equipment (e.g., incubators) and consumer electronics (e.g., 3D printer hotends).
26 AWG: Conductor diameter of 0.404mm, maximum current capacity of 2–3A, suitable for miniature heating elements in wearable technology or sensor heating.
28 AWG: Conductor diameter of 0.321mm, maximum current capacity of 1–2A, designed for ultra-low-power applications like microelectronic component heating.
Stranding Structure: All conductors adopt a multi-strand design (ranging from 7 strands for larger AWGs to 19 strands for smaller AWGs), with each strand having a diameter of 0.1–0.3mm. This stranding enhances flexibility, allowing the cable to bend repeatedly without conductor breakage—a critical feature for dynamic applications such as robotic arms or moving machinery.
Insulation Material: PTFE, a fluoropolymer with unparalleled thermal and Chemical Resistance. The PTFE insulation layer has a thickness of 0.2–0.5mm (varies by AWG size; smaller AWGs have thinner insulation to maintain flexibility). Key properties of PTFE include:
Temperature Range: -200°C to +260°C (continuous operation), with short-term resistance up to +300°C. This enables the cable to function in extreme environments, from cryogenic storage facilities to high-temperature industrial furnaces.
Electrical Insulation: Dielectric strength of 20–30 kV/mm, ensuring the cable can safely withstand its 1KV voltage rating without electrical breakdown. The dielectric constant (ε) of PTFE is approximately 2.1 (at 1 MHz), minimizing signal loss and making it suitable for applications requiring stable electrical performance.
Chemical Inertness: Resistant to most acids, bases, solvents, and hydrocarbons. It is unaffected by harsh chemicals such as sulfuric acid, nitric acid, and gasoline, making it ideal for chemical processing plants or automotive fuel system heating.
Sheath (Optional): For applications requiring additional mechanical protection, an optional FEP (Fluorinated Ethylene Propylene) sheath is available. FEP offers similar chemical resistance to PTFE but with enhanced impact resistance and a lower melting point (260°C), facilitating easier installation. The sheath adds 0.1–0.2mm to the overall cable diameter and is available in black, white, or red for color-coding in complex electrical systems.
Overall Diameter: Ranges from 1.0mm (28 AWG, no sheath) to 3.5mm (10 AWG, with FEP sheath), ensuring compatibility with tight installation spaces (e.g., inside electronic enclosures or narrow pipelines).
Flexibility: Measured by the minimum bend radius—10× the cable diameter for static applications and 15× the cable diameter for dynamic applications (repeated bending). For example, a 2.0mm diameter cable has a minimum static bend radius of 20mm and a dynamic bend radius of 30mm, allowing it to be routed through confined spaces without damaging the insulation or conductor.
Thermal Conductivity: The nickel-copper conductor has a thermal conductivity of 50–60 W/(m·K), enabling efficient heat transfer from the conductor to the surrounding environment. This ensures uniform heat distribution in heating applications, reducing hotspots that can lead to component failure.
Flame Resistance: Complies with UL 94 V-0 standards, meaning it self-extinguishes within 10 seconds of removing the ignition source and does not drip flaming material. This makes it suitable for applications where fire safety is critical, such as aerospace cabins or medical facilities.
Temperature Stability: Unlike pure copper, which experiences a significant increase in electrical resistance at high temperatures (temperature coefficient of resistance, α, of 0.00393 °C⁻¹), nickel-copper alloy has a lower α (0.0005–0.001 °C⁻¹). This means its resistance remains stable across a wide temperature range, ensuring consistent heat output and preventing overheating.
Corrosion Resistance: The nickel component forms a passive oxide layer on the conductor’s surface, protecting it from oxidation, rust, and chemical attack. This is particularly valuable in humid environments (e.g., food processing plants with high moisture levels) or marine applications (exposed to saltwater), where pure copper would corrode rapidly.
Mechanical Strength: Nickel-copper alloy has a tensile strength of 400–500 MPa, compared to 220 MPa for pure copper. This higher strength prevents conductor stretching or breakage during installation or use, extending the cable’s lifespan.
Extreme Temperature Resistance: PVC Insulation typically fails above 80°C, and rubber insulation degrades at 120°C, but PTFE remains stable up to 260°C. This allows the cable to be used in high-temperature applications such as industrial oven heating or engine compartment de-icing, where other cables would melt or crack.
Moisture and UV Resistance: PTFE is non-hygroscopic (absorbs less than 0.01% moisture by weight) and resistant to ultraviolet (UV) radiation. Unlike rubber, which becomes brittle and cracks under UV exposure, PTFE maintains its flexibility and insulation properties even when used outdoors (e.g., solar panel heating systems).
Non-Toxic and Biocompatible: PTFE is inert and non-toxic, meeting FDA (Food and Drug Administration) standards for contact with food and medical devices. This makes the cable suitable for applications such as food processing equipment heating (e.g., bakery ovens) or medical device heating (e.g., surgical tool sterilization units).
Multi-Strand Conductor: The use of fine, multi-strand conductors (instead of a single solid conductor) reduces the cable’s stiffness. Each strand moves independently during bending, distributing stress evenly and preventing conductor fatigue. For example, a 20 AWG Cable with 19 strands can be bent over 10,000 times (at a dynamic bend radius) without conductor breakage—far exceeding the 1,000-cycle lifespan of a solid-Conductor Cable.
PTFE’s Inherent Flexibility: PTFE has a low modulus of elasticity (approximately 0.5 GPa), making it highly flexible even at low temperatures. Unlike rigid insulation materials (e.g., ceramic), PTFE bends easily without cracking, ensuring the cable remains functional in cold environments (e.g., freezer pipeline freeze protection).
Plastic Extrusion: Plastic extrusion machines require precise heating of the extruder barrel to maintain the plastic’s melting point (typically 150–300°C). The cable’s PTFE insulation withstands these high temperatures, while its nickel-copper conductor ensures stable heat output. Its flexibility allows it to be wrapped around the barrel’s curved surface, ensuring uniform heating and preventing plastic degradation due to hotspots.
Mold Heating: In injection molding, molds must be heated to 80–200°C to ensure proper plastic flow and part quality. The cable’s small diameter (down to 1.0mm) allows it to be embedded in narrow mold channels, while its corrosion resistance protects it from mold release agents (which are often acidic).
Pipeline Freeze Protection: Industrial pipelines (carrying water, oil, or chemicals) in cold climates require freeze protection to prevent pipe bursts. The cable’s 1KV voltage rating enables it to be used in medium-voltage systems, while its moisture resistance ensures it functions in wet environments. Its flexibility allows it to be wrapped around pipelines of varying diameters, from 2-inch to 24-inch pipes.
Aerospace Cabin Heating: Aircraft cabins require heating systems that function at high altitudes (where temperatures can drop to -50°C) and withstand vibration. The cable’s PTFE insulation resists cryogenic temperatures, while its nickel-copper conductor maintains stable performance under vibration. Its flame resistance (UL 94 V-0) ensures safety in the event of a fire.
Automotive Engine De-Icing: Engine compartments in cold climates need de-icing systems to prevent fuel line freezing and battery performance loss. The cable’s chemical resistance protects it from engine oils and gasoline, while its flexibility allows it to be routed around engine components (e.g., fuel lines, battery terminals). Its small diameter (down to 1.0mm) fits in tight engine spaces.
Electric Vehicle (EV) Battery Heating: EV batteries require temperature regulation (20–40°C) to maintain performance and lifespan. The cable’s precision heating (enabled by small AWG sizes like 24–28 AWG) allows it to be integrated into battery packs, while its non-toxic, biocompatible PTFE insulation ensures safety.
Diagnostic Equipment: Devices like MRI machines and ultrasound scanners require precise heating of components (e.g., transducers) to maintain accuracy. The cable’s small AWG sizes (24–28 AWG) enable it to be integrated into miniature components, while its PTFE insulation’s biocompatibility prevents contamination of samples or patients.
Surgical Tools: Surgical tools (e.g., laser scalpels) often require heating to sterilize or maintain functionality. The cable’s high-temperature resistance (up to 260°C) withstands sterilization processes, while its corrosion resistance protects it from disinfectants (e.g., hydrogen peroxide).
Laboratory Incubators: Incubators need uniform heating (37°C for cell culture) to ensure sample viability. The cable’s nickel-copper conductor’s stable resistance ensures consistent heat output, while its flexibility allows it to be arranged in a spiral pattern inside the incubator, ensuring uniform temperature distribution.
3D Printers: 3D printer hotends require heating to 180–260°C (for PLA or ABS filaments). The cable’s PTFE insulation withstands these temperatures, while its small diameter (24–26 AWG) fits in the hotend’s tight space. Its flexibility allows it to move with the printer’s extruder, preventing cable damage during printing.
High-Performance Heaters: Portable heaters (e.g., space heaters for outdoor use) need durable, flexible cables that withstand outdoor conditions. The cable’s moisture and UV resistance ensure it functions in rain or sunlight, while its flame resistance enhances safety.
Audio Equipment: High-end audio amplifiers require cables with low signal loss to maintain sound quality. The cable’s PTFE insulation’s low dielectric constant (2.1) minimizes signal loss, while its flexibility allows it to be routed inside the amplifier’s chassis without interfering with other components.
Alloy Melting and Drawing: Nickel and copper are melted in a vacuum induction furnace at 1,300–1,400°C to form the alloy. The molten alloy is cast into ingots, which are then drawn through a series of dies to reduce their diameter to the required size for each strand (0.1–0.3mm). This drawing process is done at room temperature (cold drawing) to enhance the alloy’s tensile strength.
Stranding: The fine strands are twisted together using a stranding machine, which ensures uniform tension and strand distribution. The number of strands varies by AWG size (7 strands for 10 AWG, 19 strands for 28 AWG). The stranding process is monitored to ensure the conductor’s diameter and resistance meet specifications.
PTFE Pellet Preparation: PTFE is supplied as fine powder, which is compressed into pellets under high pressure (20–30 MPa) and sintered at 360–380°C to form a solid, homogeneous material. This sintering process removes impurities and ensures the PTFE has uniform properties.
Extrusion: The PTFE pellets are fed into an extruder, where they are heated to 300–320°C (just below PTFE’s melting point) and forced through a die that coats the conductor with a uniform insulation layer (0.2–0.5mm thick). The extrusion speed is controlled to ensure the insulation thickness is consistent along the cable’s length.
Cooling and Curing: The Insulated Cable is cooled in a water bath (20–25°C) to solidify the PTFE insulation. It is then cured in an oven at 260°C for 1–2 hours to enhance the insulation’s mechanical and electrical properties.
FEP Pellet Melting: FEP pellets are melted in an extruder at 290–310°C (FEP’s melting point).
Sheath Extrusion: The melted FEP is extruded over the insulated cable, forming a sheath with a thickness of 0.1–0.2mm. The cable is then cooled in a water bath and cured at 200°C for 30 minutes to ensure the sheath adheres to the insulation.
Electrical Testing: Each cable undergoes a voltage withstand test (applying 2KV AC for 60 seconds) to verify insulation integrity—no breakdown or leakage current above 5mA is permitted. Additionally, a resistance test is conducted using a micro-ohmmeter to ensure the conductor’s resistance falls within the specified range (e.g., 0.05–0.06 Ω/m for 10 AWG, 0.15–0.17 Ω/m for 20 AWG). This ensures consistent electrical performance across all batches.
Thermal Testing: Samples are subjected to thermal cycling tests, where they are exposed to alternating temperatures of -200°C (for 2 hours) and +260°C (for 2 hours) for 50 cycles. After cycling, the cables are inspected for insulation cracking, conductor disconnection, or changes in resistance (maximum allowed change: ±5%). This validates their performance in extreme temperature fluctuations.
Mechanical Testing: Flexibility tests involve bending the cable around a mandrel (matching the minimum bend radius) 10,000 times for dynamic applications. After testing, the cable is checked for conductor breakage or insulation damage. Tensile strength tests are also performed, pulling the cable at a rate of 50mm/min until it breaks—minimum tensile strength requirement is 150 N for all AWG sizes.
Chemical Resistance Testing: Cables are immersed in common industrial chemicals (e.g., 98% sulfuric acid, 50% nitric acid, gasoline) for 72 hours at 25°C. Post-immersion, insulation thickness and dielectric strength are measured; no reduction in thickness above 10% or dielectric strength below 15 kV/mm is acceptable. This confirms their suitability for chemical processing environments.
Cable Spools: For lengths of 100m, 200m, or 500m (custom lengths available), cables are wound onto durable plastic spools (diameter: 300mm for small AWGs, 500mm for large AWGs). The spools are made of high-density polyethylene (HDPE), which is impact-resistant and moisture-proof. Each spool is labeled with key product information: AWG size, length, voltage rating, material composition, batch number, and manufacturing date.
Protective Wrapping: The spooled cable is wrapped in a layer of anti-static polyethylene film to prevent electrostatic discharge (ESD)—critical for electronic and aerospace applications where ESD can damage sensitive components. An additional layer of kraft paper is added for mechanical protection against scratches or punctures.
Outer Cartons: Spools are placed into corrugated cardboard cartons (double-walled, bursting strength: 200 kPa) with custom foam inserts to secure the spool and prevent movement during transit. Each carton can hold 1–5 spools (depending on spool size) and is printed with handling instructions: “Keep Dry,” “Avoid Extreme Temperatures,” and “Do Not Drop.”
Sample Bags: For sample lengths (1m–5m), cables are cut to size and sealed in transparent, resealable polyethylene bags (thickness: 0.1mm) with a tamper-evident seal. Each bag includes a product datasheet and a sample certificate, confirming the sample matches production specifications.
Sample Boxes: Multiple sample bags (up to 10) are packed into small cardboard boxes (150mm × 100mm × 50mm) lined with bubble wrap for protection. The box is labeled with “Sample Only” and the customer’s reference number for easy identification.
Reel Material: Customers can request metal spools (stainless steel or aluminum) for heavy-duty storage or repeated use (e.g., in manufacturing facilities where spools are reused for cable feeding).
Labeling: Custom labeling is available, including barcodes for inventory tracking, customer logos, or compliance labels (e.g., UL, CE, RoHS) for specific markets.
Moisture Barriers: For shipping to humid regions (e.g., Southeast Asia), desiccant packs (50g per carton) and vacuum-sealed packaging can be added to prevent moisture absorption.
Carriers: Partner with reputable logistics providers (e.g., FedEx, UPS, local courier services) offering door-to-door delivery. For bulk orders (over 10 cartons), dedicated trucking services are used to minimize handling and reduce transit time (typically 1–3 business days for major cities, 3–5 days for remote areas).
Transit Conditions: Trucks are equipped with temperature-controlled compartments (maintaining 5°C–30°C) to protect cables from extreme temperatures. Cargo is secured with straps and load bars to prevent shifting during transport.
Mode of Transport:
Air Freight: For urgent orders (delivery time: 3–7 business days), air freight is used. Cables are packed in IATA-compliant cartons, with weight and dimension limits adhering to airline regulations.
Ocean Freight: For large-volume orders (delivery time: 2–6 weeks, depending on destination), ocean freight is more cost-effective. Cartons are palletized (wooden or plastic pallets, heat-treated to ISPM 15 standards for international shipping) and loaded into shipping containers (20ft or 40ft, with optional climate control for humid routes).
Customs Documentation: A complete set of documents is provided, including commercial invoice, packing list, certificate of origin (CO), material safety data sheet (MSDS), and compliance certificates (UL, CE, RoHS). For countries with strict import regulations (e.g., the EU, Japan), additional testing reports (e.g., REACH compliance) are included to avoid customs delays.
Shipment Tracking: Customers receive a unique tracking number via email once the order ships, allowing them to monitor the shipment’s status in real time through the carrier’s website.
Insurance: All shipments are insured against loss, damage, or theft. The insurance coverage amount is equal to the order’s total value, with claims processed within 5 business days of receiving damage documentation.
Order Channels: Orders can be placed via email, online portal, or direct contact with the sales team. Customers provide details such as AWG size, length, quantity, packaging requirements, and delivery address.
Order Confirmation: Within 24 hours of order placement, a confirmation email is sent, including order summary, estimated production time (3–5 business days for standard orders, 7–10 days for custom lengths/specifications), and delivery date.
Production Scheduling: Orders are prioritized based on delivery date, with dedicated production slots for urgent orders. Customers receive weekly updates on production progress for large orders (over 1,000m).
Dispatch Notification: Once production and quality testing are complete, a dispatch notification is sent, including tracking number, carrier details, and expected delivery date.
Delivery Inspection: Upon delivery, customers are advised to inspect the packaging for damage. If damage is found, the carrier must be notified immediately (within 24 hours) and photos of the damage provided for insurance claims.
Acceptance: Customers have 3 business days to inspect the product for defects (e.g., incorrect AWG size, insulation damage). If defects are found, the sales team is contacted, and a replacement or refund is arranged within 5 business days.
Standard Samples: Samples of all AWG sizes (1m length) are available free of charge for qualified customers (e.g., industrial buyers, OEMs). Customers only pay for shipping costs.
Custom Samples: For custom specifications (e.g., unique sheath color, special length), samples are available at a nominal cost (covering material and production expenses), which is refundable if a bulk order (over 500m) is placed within 3 months.
Request Submission: Customers submit a sample request via email or online portal, providing details such as AWG size, quantity of samples, delivery address, and intended application (to ensure the correct sample is provided).
Sample Delivery: Standard samples are dispatched within 2 business days, with delivery time depending on the shipping method (1–3 days for domestic, 3–7 days for international).
Technical Assistance: The engineering team provides support for sample testing, including guidance on conducting electrical, thermal, or mechanical tests. If required, a technical representative can join virtual testing sessions to answer questions.
Test Reports: If customers conduct third-party testing, the company can provide additional documentation (e.g., material certificates) to assist with test validation.
Dedicated Engineers: A team of experienced electrical engineers is available to provide technical assistance via phone, email, or video call. Support includes:
Guidance on cable installation (e.g., minimum bend radius, compatibility with connectors).
Troubleshooting (e.g., addressing unexpected resistance changes, insulation damage).
Custom application solutions (e.g., designing cable configurations for unique heating systems).
Technical Resources: An online resource center provides downloadable documents, including installation guides, product datasheets, MSDS, and application case studies.
Warranty Coverage: The 1KV PTFE heating cable comes with a standard 2-year warranty from the date of delivery. The warranty covers defects in materials or workmanship (e.g., conductor breakage due to manufacturing error, insulation cracking without external damage).
Warranty Claim Process: To file a claim, customers provide:
Proof of purchase (invoice or order number).
Photos/videos of the defect.
Details of usage (e.g., operating temperature, application).
Extended Warranty: An optional 1-year extended warranty is available for an additional 5% of the order value, covering normal wear and tear (e.g., conductor fatigue from repeated bending within specified limits).
Return Eligibility: Unused, undamaged cables can be returned within 30 days of delivery for a full refund (minus shipping costs). Custom orders (e.g., unique lengths, special sheath colors) are non-returnable unless defective.
Return Process: Customers request a return authorization (RA) via email, providing order details and reason for return. The RA number is printed on the return package, and the company arranges for pickup (for bulk orders) or provides a prepaid shipping label (for samples/small orders). Refunds are processed within 5 business days of receiving the returned products.
Feedback Collection: After delivery and warranty periods, customers are invited to complete a satisfaction survey covering product quality, delivery time, and after-sales support.
Continuous Improvement: Feedback is reviewed quarterly by the product development and customer service teams to identify areas for improvement (e.g., adjusting packaging for better protection, enhancing technical support resources).
Hongtai Cable Technology Co., Ltd
Электронная почта: export@qlcables.com
sales@qlcables.com
Тел/WhatsApp:+86-18032066271
Добавить ： Зона промышленного развития Сяоку, округ Нинджин, Сингтай -Сити ， провинция Хэбей, Китай
Copyright © Hongtai Cable Technology Co., Ltd Техническая поддержка:Ronglida Technology
Этот веб-сайт использует файлы cookie, чтобы обеспечить вам максимально эффективное использование нашего веб-сайта.
English
Español
Portugues
Français
العربية
ไทย
Türk dili
Indonesia
Tiếng Việt
телефон
почтовый ящик
Комментарий
（0）