The 1/C Cu/XLPE/PVC/Awa/PVC single core aluminum wire armoured cable is a precision-structured and reliable power transmission cable, with cross-sectional specifications covering 120mm², 150mm², 185mm², and 240mm², suitable for medium and high voltage power transmission scenarios.​ This cable uses high-purity electrolytic copper as the conductor (Cu), which has excellent conductivity, can effectively reduce transmission losses, and ensure efficient power transmission. The outer layer of the conductor is wrapped with a cross-linked polyethylene (XLPE) insulation layer, which has the characteristics of a wide temperature resistance range (-40℃ to 105℃), aging resistance, and high insulation resistance (≥1000MΩ). It can maintain stable insulation performance in complex environments and greatly reduce the risk of electric leakage. The outer layer of XLPE is a polyvinyl chloride (PVC) inner sheath, which plays a buffering and isolating role to protect the insulation layer from damage in subsequent processes.​ The armor layer adopts an aluminum wire (Awa) braided structure, which combines lightweight and high strength. It can withstand a lateral pressure of 10kN/m and an impact force of 5kN, and also has good corrosion resistance. It is suitable for places with protection requirements such as underground direct burial, tunnel laying, and industrial plants. The outermost layer is a PVC outer sheath, which further enhances the cable's weather resistance and mechanical protection, resisting ultraviolet rays, oil pollution, and external impact.​ In terms of applications, cables with 120mm² to 185mm² are suitable for main lines in industrial parks and power distribution systems of large buildings; 240mm² cables can meet the needs of large-capacity power transmission such as substation outgoing lines and urban power grid branches. Its single-core design facilitates laying in high-voltage scenarios and reduces eddy current losses.​ In terms of general information, the cable is packaged with moisture-proof kraft paper and galvanized iron reels, with a wrapping film on the outer layer to ensure the safety of transportation and storage; it supports various transportation methods such as land and sea transportation, and can provide 1-10 meters of samples and test reports on demand; the after-sales service provides a 2-year warranty, and the professional team responds to fault consultations within 72 hours to ensure trouble-free use.​

Xhhw Xhhw-2 RW90 1AWG 10AWG 4 AWG Aluminum Cable Wire 600V XLPE​ The XHHW, XHHW-2, and RW90 aluminum cable series (1AWG to 10AWG) deliver high-performance 600V power transmission, featuring XLPE insulation for industrial and commercial applications. Crafted from 1350-H19 aluminum (61% IACS conductivity), these cables offer tailored current capacities: 1AWG (150A), 4AWG (85A), 10AWG (40A) at 90°C (RW90/XHHW-2) and 75°C (XHHW).​ XHHW-2 and RW90 variants excel in extreme conditions (-40°C to 90°C) with UV and chemical resistance, while XHHW operates at 75°C. All feature 7-strand conductors (1.6-3.2mm diameter) for flexibility (bend radius 8× OD), suitable for conduit, cable trays, or direct burial.​ Compliant with UL 44 and ASTM B230, these cables balance tensile strength (1,200-2,500N) and lightweight design (0.4-1.8kg/m). Pricing ranges ​ 2.50− 8.70/ft depending on gauge, making them cost-effective for industrial wiring, renewable energy systems, and commercial buildings requiring reliable 600V power.

AWG 4/0 Xhhw Wire Aluminum Xhhw-2 Fr Sr Cable Xlp Insulation Building Wire 600V​ The AWG 4/0 XHHW Aluminum Cable—including XHHW-2, FR (Flame Retardant), and SR (Sunlight Resistant) variants—represents a heavy-duty solution for 600V building wiring. Crafted from 1350-H19 aluminum (61% IACS conductivity), its 19-strand (2.1mm diameter) design delivers 230A continuous current at 90°C (XHHW-2) and 195A at 75°C (standard XHHW).​ XLPE insulation ensures exceptional durability: 1.8mm thickness with 22kV/mm dielectric strength, resisting chemicals, moisture, and abrasion. XHHW-2 handles -40°C to 90°C, while FR variants meet UL 94 V-0 flammability, and SR models feature 2.0% carbon black for UV resistance (10,000-hour sunlight endurance).​ Compliant with UL 44 and ASTM B230, this 4/0 AWG cable (3.8kg/m) suits heavy-load applications: main service entrances, large motor feeds, and commercial building distribution. Its flexibility (8× OD bend radius) facilitates conduit/tray installation, offering 40% cost savings over copper, making it ideal for industrial and high-rise construction.

Thhw Al Aluminum Wire Cable 4 6 1/0 2/0 4/0 AWG 350mcm 600V with PVC Insulation​ The THHW Aluminum Wire Cable series—spanning 4 AWG to 350MCM (including 6, 1/0, 2/0, 4/0 AWG)—delivers reliable 600V power distribution for commercial and industrial applications. Constructed with 1350-H19 aluminum (61% IACS conductivity), these single-conductor cables feature PVC insulation (1.0–2.2mm thickness) rated for 75°C continuous operation (105°C short-term).​ Current capacities scale with gauge: 4 AWG (85A), 6 AWG (55A), 1/0 AWG (125A), 2/0 AWG (145A), 4/0 AWG (195A), 350MCM (310A). The stranded design (7–61 strands, 1.6–3.4mm diameter) ensures flexibility (6× OD bend radius) for conduit, cable trays, or dry locations.​ PVC insulation resists oils, water, and abrasion, with flame-retardant properties (UL 94 V-2). Compliant with UL 83 and ASTM B230, these lightweight cables (0.3–3.2kg/m) offer 40% cost savings over copper, ideal for building wiring, motor leads, and industrial control systems requiring durable 600V performance.

This is an outdoor direct bury power cable with the specification of 3×240 + 120 mm². It uses aluminum conductors (AL), with cross-linked polyethylene (XLPE) as the insulation layer and polyvinyl chloride (PVC) as the sheath. The rated voltage is 0.6/1kV. Its structure consists of 3 main cores with a cross-sectional area of 240mm² and 1 neutral core of 120mm². The aluminum conductor has good electrical conductivity and economy, making it suitable for outdoor power transmission scenarios. The XLPE insulation layer has excellent heat resistance, chemical resistance, and electrical insulation performance, which can effectively ensure the safe operation of the cable. The PVC sheath provides good mechanical protection and weather resistance, enabling it to adapt to complex conditions such as soil pressure, humidity, and temperature changes in the direct bury environment. This cable is applicable to outdoor power distribution systems with a voltage level of 0.6/1kV, especially suitable for direct bury laying. It can be widely used in outdoor power transmission projects such as urban power grids, industrial parks, and residential communities, providing reliable guarantee for stable power transmission.

The 240V AC Nayy Na2xy 4-core 95 square millimeter aluminum cable is a power cable with a rated voltage of 1kv, specially designed for lightning protection. With its unique structure and performance, it is widely used in lighting systems requiring lightning protection and related power transmission scenarios, such as large outdoor squares, external lighting of high-rise buildings, street lamp systems in industrial parks, etc.​ The cable adopts a 4-core 95 square millimeter aluminum conductor structure, and the conductor is made of high-purity aluminum material (purity ≥99.5%) through a compact stranding process. This process not only improves the filling density of the conductor, reduces the skin effect loss during current transmission, but also enhances the flexibility of the cable, making it easier to lay in complex environments. At 20℃, the DC resistance of a single-core conductor is ≤0.32Ω/km, and the low resistance characteristic ensures the efficiency of power transmission, which can meet the power demand of high-power lighting equipment.​ The insulation layer is made of special materials that meet the Nayy Na2xy standard, with excellent electrical insulation performance and weather resistance. The volume resistivity is ≥1×10¹³Ω·cm, and the insulation strength is ≥18kV/mm, which can work stably in the ambient temperature range of -40℃ to 70℃. Its excellent insulation performance can effectively prevent leakage, ensure the safety of power transmission, and resist the erosion of external environmental factors on the internal structure of the cable.​ To achieve the lightning protection function, the cable has been specially optimized in structural design, with a certain ability to withstand impulse voltage. It can withstand the instantaneous high voltage impact generated during lightning strikes, reducing the damage of lightning to connected lighting equipment. The outer sheath is made of aging-resistant and UV-resistant materials, with a uniform thickness of ≥2.0mm, a tensile strength of ≥10MPa, and an elongation at break of ≥120%. It can effectively protect the internal structure of the cable from mechanical damage, UV radiation and chemical corrosion, and prolong the service life of the cable.​ In terms of current-carrying capacity, the cable performs excellently. The current-carrying capacity is about 210A when laid in air and about 170A when laid underground, which can meet the simultaneous operation needs of multiple groups of high-power lamps in large lighting systems. Its minimum bending radius is 10 times the outer diameter of the cable, which is convenient for laying and installation in narrow spaces or complex terrains, adapting to different wiring environments.​ The production process strictly follows relevant standards, with a complete quality control system from raw material inspection to finished product testing. The finished products need to pass multiple tests such as power frequency withstand voltage (3kV/5min without breakdown), insulation resistance test, impulse voltage resistance test, mechanical performance test, etc., to ensure that the product quality meets the strict requirements of lightning protection and power transmission, and provides reliable power support for various lighting systems requiring lightning protection.